Brightening Oil

Brightening Oil

REF : 5055
Price range: 15,00 € through 278,00 €

Formulated with the same composition as Hardening Oil but with a small amount of white pigment added, Brightening Oil helps preserve the light color of pale woods on floors, stairs, and furniture.

Apply in 2 coats.

In stock

Pack size
Choose an option▾
  • 250 ml
  • 750 ml
  • 2.5 L
  • 2.64 gal
clear

Additional details

Good to know

Mix the product thoroughly before use. Applying oil is an impregnation technique; you are not forming a film layer! Lay cloths, sander dust bags, and oil-soaked work clothes flat to dry in the fresh air: risk of spontaneous combustion.

Tools

  • Spalter brush or
  • Gloss roller or
  • Floor buffer
  • Cloth
  • Clean tools with Plant-based Solvent

Good to Know

What should you do if the surface is slow to dry, sticky, or shiny after application?

Excess oil forms shiny, sticky patches that are difficult to dry; to remove them, rub the surface with a maroon abrasive pad (Siavlies: synthetic fibers for sanding and matting wood surfaces) to “rub away” the excess oil from the wood surface. The advantage of the abrasive pad is that it doesn’t clog up after 5 seconds, creates no dust, and doesn’t pull the oil out of the substrate.

If the surface is then uniform, you’re done. If there are marks left from the pad, apply an ultra-thin layer of Brightening Oil with a cloth to even out the tone of your floor.

We advise you to always perform a test on a ¼ m² area before applying the solution to the entire surface. Each color of abrasive pad corresponds to a different level of abrasion. Don’t use a white one; it’s too soft and won’t do anything. Green and black are more abrasive than maroon.

Technical specifications

Coverage

10 to 15 m²/L

Coats

2

Drying time

24 hours at 68°F

Pack size

250 ml, 750 ml, 2.5 L, 2.64 gal

Technical Data Sheets

Safety Data Sheets

How to Apply

Any questions?

Your Shopping cart

Close