Wood O Stone

Wood O Stone

REF : 5020
Price range: 13,30 € through 205,91 €
Remarkable protection for bathroom surfaces and countertops, both horizontal and vertical. Wood O Stone oil is a natural oil, formulated without organic solvents, for the protection and finishing of mineral surfaces such as porous natural stone, smoothed clay plaster, “waxed concrete,” porous concrete screeds, cement tiles, porous limestone, porous marble, porous sandstone, terracotta, and non-tannic wood (pine, larch, beech, poplar, OSB, MDF…). It also binds dust on brick walls.

In stock

Pack size
Choose an option▾
  • 250 ml
  • 1 L
  • 2.5 L
  • 2.64 gal
clear

Additional details

Good to know

Lay cloths, dust from sander bags, and oil-impregnated work clothes flat to dry in fresh air: risk of self-combustion.

Tools

  • Flat brush

Good to Know

What should you do if the surface is difficult to dry, sticky, and shiny after application?

Excess oil forms shiny, sticky patches that are difficult to dry; to remove them, rub the surface with a burgundy abrasive pad (Siavlies: synthetic fibers for sanding and dulling wood surfaces) to “erase” the excess oil from the wood surface. The advantage of the abrasive pad is that it does not clog after 5 seconds, creates no dust, and does not pull the oil out of the substrate.

If the surface is then uniform, no further action is needed. If there are marks left from the pad, apply an ultra-thin layer of “Wood O Stone” oil with a cloth to homogenize the color of your floor.

We advise you to always perform a test on a 1/4 m² area before applying the solution to the entire surface. Each color of abrasive pad corresponds to a different level of abrasion. Do not use a white one; it is too soft and will be ineffective. The green and black pads are more abrasive than the burgundy one.

Technical specifications

Coverage

15 m²/l

Coats

2

Drying time

24 hours at 68°F

Pack size

250 ml, 1 L, 2.5 L, 2.64 gal

How to Apply

Any questions?

Your Shopping cart

Close