Breathable Lime Skim Coat

Breathable Lime Skim Coat

REF : 8320
Price range: 23,50 € through 61,90 €
Lime skim coat powder, natural lime-based, for full wall or plasterboard smoothing. 100% mineral: air lime, breathable, eco-friendly, and healthy. This lime plaster contains no preservatives (MIT/BIT). This skim coat is suitable for damp rooms.

In stock

Pack size
Choose an option▾
  • 2.5 kg
  • 10 Kg
clear

Benefits for Your Home and Materials

  • Water vapor permeable.
  • All ingredients are of natural origin.
  • Preservative-free plaster (MIT/BIT: methylisothiazolinone).
  • Plaster without synthetic binders.
  • Vegan

Additional details

Properties

  • This skim coat is a mineral lime plaster for smoothing and filling, with improved lime-based adhesion. It’s easy to apply and intended for interior work.
  • Use for thin repairs and for full smoothing of plasterboards (Gyprox, Fermacell), silicate boards (Promat, Siniat), natural gypsum boards, after jointing with the plaster and technique recommended by the board manufacturer.
  • It’s also suitable for all sound and slightly absorbent surfaces like lime plasters, gypsum plasters, rough wall surfaces, concrete, terracotta blocks, lime-hemp blocks (Isohemp), raw earth blocks, clay brick walls…
  • Can be sanded after just three hours.
  • Application thickness: 0.5 to 4 mm.

Finish Type

  • Galtane’s lime skim coat has a fairly smooth, porous, and breathable finish.
  • The lime skim coat can be covered with Galtane Lime Paints, Galtane Clay Paints, or Galtane Silicate Paints.

Good to Know

  • For application over synthetic resin dispersion paints, perform a test application.
  • Do not use on wood, wood fiber-based materials, or natural resin dispersion paints.
  • Not suitable for filling plasterboard joints.

Technical specifications

Coverage

1 m² / kg / mm

Drying time

12h at 68°F

Packaging

Plastic-free paper

Pack size

2.5 kg, 10 Kg

Technical Data Sheets

Safety Data Sheets

Surface Preparation

  • Surfaces must be sound: porous, homogeneous, clean, dry (< 2% moisture), solid, grease-free, and chemically neutral.
  • Thoroughly clean old paints (dispersion), remove flaking paint, remove formwork oil residues from concrete, eliminate friable parts and old adhesives. Moldy surfaces must be cleaned. Carefully remove wallpaper paste residues. See technical data sheet: How to remove wallpaper paste residues?
  • Thoroughly dust off surfaces.
  • Chalky surfaces must be pre-treated with the fixative (ref. 8145).
  • Plasterboard joints should be made according to best practices with the plaster recommended by the board manufacturer.
  • Treat colored surfaces that may reappear due to capillarity with a coat of Isolan (ref. 8234). Stubborn stains (grease, nicotine, soot, dry moisture, insect droppings…) should also be covered with Isolan.
  • Remove any loose elements (masonry). Dowel holes must be filled beforehand and refilled after a few hours.

How to Apply

  • Pour 1 kg of skim coat into 450 to 500 ml of clean, cold water.
  • Mix with a powerful agitator.
  • Let it swell for at least 15 minutes and stir again before use.
  • If necessary, the amount of water can be adjusted. To achieve a good consistency, the mixture must be prepared on-site, just before application.

Any questions?

Your Shopping cart

Close