

























Wood Bliss ® High-C – 4055 – Wood fire retardant – CLT
Benefits for the home and its materials
-
Mineral formulation: Free of PFAS, free of halogenated flame retardants, borates, formaldehyde, and solvents.
-
Evaluation independent: The composition and safety of the product are subject to chemical and microbiological at various laboratories and engineering firms run by independent engineers (Zörner, Lafu).
-
Indoor air quality: Its mineral composition based on silicates does not release dangerous synthetic VOCs into the home.
Additional details
Good to know
To remain compliant with the 13501-1 standard, no other finishing product can be applied after Wood Bliss® High-C. The treatment consists of applying: 1 x 200ml/m² of Wood Bliss® ref. 4050 and 2 x 200ml/m² of Wood Bliss® High-C ref. 4055 Mineralization and hardening are achieved after 6 weeks. Whitish traces may appear after treatment. After 6 weeks, you can remove them with a dry cotton cloth. At the same time, this process will protect the wood from wood-boring insects and wood-decay fungi. Since Wood Bliss® contains no questionable substances, wood scraps from a project will not be considered materials to be disposed of with hazardous waste. The same applies when the building is deconstructed.Properties
- Given that the silicate molecules have been once they are impregnated and mineralized in the wood, do not evaporate or dissolve in water, the effectiveness of Wood Bliss High-C is unlimited over time.
- The advantage of the Wood Bliss and Wood Bliss High-C is that you will have a protection against the fire, the fungi that feed on wood and wood-boring insects… 3 benefits in 1 product for the panels made of wood, CLT, frames…
Finish Type
- With the Wood Bliss and Wood Bliss High-C which are not subject to not any toxic treatments for wood and for framework, you will continue to enjoy a “wooden” feel ” after treatment. The wood will not have the appearance of a synthetic surface.
- With Wood Bliss, the concept of “Biophilia” will be preserved.
Technical specifications
| Coverage | 200ml/m² |
|---|---|
| Coats | 2 |
| Drying time | 24h |
| Pack size | 500 ml, 1 L, 5 L |
Technical Data Sheets
Safety Data Sheets
Any questions?
Related products
-
11,80 € – 246,90 €Price range: 11,80 € through 246,90 €Select options This product has multiple variants. The options may be chosen on the product page
-
13,50 € – 254,90 €Price range: 13,50 € through 254,90 €Select options This product has multiple variants. The options may be chosen on the product page
-
33,30 € – 241,10 €Price range: 33,30 € through 241,10 €Select options This product has multiple variants. The options may be chosen on the product page
-
13,30 € – 205,91 €Price range: 13,30 € through 205,91 €Select options This product has multiple variants. The options may be chosen on the product page
-
30,79 € – 267,20 €Price range: 30,79 € through 267,20 €Select options This product has multiple variants. The options may be chosen on the product page
-
25,00 € – 132,80 €Price range: 25,00 € through 132,80 €Select options This product has multiple variants. The options may be chosen on the product page
-
17,00 € – 101,89 €Price range: 17,00 € through 101,89 €Select options This product has multiple variants. The options may be chosen on the product page
-
15,00 € – 278,00 €Price range: 15,00 € through 278,00 €Select options This product has multiple variants. The options may be chosen on the product page
Learn More
Fire protection for wood and CLT (Cross Laminated Timber) panels
Wood Bliss® High-C: new generation “B-S1-d0” mineral fire retardant.
Fire retardant treatment for CLT panels and reaction to fire according to EN 13501-1 standard
Fire-retardant property: the results of tests conducted in accordance with the standard of European European have confirmed the ability of Wood Bliss® High-C to make fire-resistant the wood used in construction including the panels made of CLT.
It meets fire safety requirements and standards for residential construction, office buildings, schools, and more.
Tests conducted in September 2019 by the University of Stuttgart in accordance with standard EN 13501-1:2018 on Douglas fir and CLT panels impregnated with one coat of Wood Bliss® (ref. 4050) and two coats of Wood Bliss® High-C (ref. 4055) yielded the following excellent results: B-S1-d0. Fire reaction class: B—very difficult to ignite (M1 according to the French standard) Smoke production: S1—low smoke emission Formation of flaming droplets: d0—none
Wood Preservation in the renovation of older buildings: Pests gnaw on the wood, causing thereby a loss of mass and of stability. Wood Bliss® fills the channels with nutrients, strengthens the wood cracked wood and replaces thereby the mass of wood lost.
Applying this product helps avoid expensive renovation techniques and the disposal of infested wood.
How does Wood Bliss® High-C work for B-S1-d0 reaction to fire?
Wood Bliss® High-C also acts as a mineral flame retardant thanks to a combination of factors a mineral flame retardant thanks to a combination of factors a mineral flame retardant thanks to a combination a mineral flame retardant thanks to a combination a mineral flame retardant thanks to a9> thanks to a combination of a non-combustible PFAS-free barrier, heat absorption through evaporation and a minimum amount of flammable gases. Wood Bliss® High-C extends the ignition time and reduces the speed at which the fire spreads.
Wood Bliss® High-C does not pollute the wood.
When a wooden building is deconstructed, the wood can be reused. During a project, wood treated with Wood Bliss High-C should not be classified as polluting or hazardous waste.
















