Tadelakt – See Archikal 900

Tadelakt – See Archikal 900

REF : 8370
This reference is no longer available. Discover Archikal 900: a waxed hydraulic lime plaster.

out of stock

Additional details

Technical specifications

Coverage

1 m² / kg / mm

Coats

2

Drying time

24 hours at 68°F

Dilution

Water

Pack size

2.5 kg, 5 kg, 25 kg

Any questions?

Learn More

What is Tadelakt?

Tadelakt is a Moroccan technique originating in Marrakech, similar to Italian stucco. The characteristic lime from this region is applied as a coating and then crushed using a pebble. Finally, it is polished with polishing soap.

Using Galtane natural Tadelakt

This lime-based coating is formulated for interior surfaces only. The main feature of Tadelakt is that it is water-repellent, though it is not completely waterproof. These shimmering surfaces have an appeal that is hard to resist. Working with stone creates a surface that seems alive: it shines naturally and appears to undulate because it isn’t perfectly straight. You also get color effects from the artisan’s movements: areas where the coating was compacted more tightly take on a deeper hue. Tadelakt also shifts colors depending on the light.

Very few written records exist regarding its origins. Some believe this technique dates back to Antiquity, where it was first used to waterproof drinking water cisterns. Later, it was used in the design of hammams and palaces. The name Tadelakt likely comes from the verb “dellek,” meaning to knead or compress.

Lime from the Marrakech region is obtained through calcination, possesses unique characteristics, and is used without additives! It is tinted with pigments and simply sifted. This produces a coating as dense as the European concrete used in water treatment plants. Indeed, it is a solid and highly water-resistant finish, which is why it is very often used for decorating bathrooms.

Because calcined hydraulic lime has a short shelf life, and for transport and ecological reasons, we decided it wasn’t reasonable to import this lime from Marrakech. We have therefore developed a ready-to-use product using local raw materials, providing the same qualities as Marrakech lime. Galtane’s Tadelakt is a product based on many years of successful experience.

Properties

  • powder mortar to be mixed with water, white color
  • purely mineral product
  • diffusion capacity
  • free of synthetic products (contains no cement)
  • neutral odor
  • dirt-resistant
  • water-repellent
  • sanitizing action (high alkalinity)
  • can be applied to fresh lime plaster (fresco technique)

Tadelakt Composition

Tadelakt is formulated from natural hydraulic lime, quartz sands, marble powders, clays, and methylcellulose.

Emissions

Indoor air emissions: A+; according to ISO 16000-9

Tools to use

The most important tool for this technique is the stone, a pebble with a flat face and rounded edges. Use a mason’s trowel to apply the coating, a float for compacting, and a spatula (made from recycled plastic) for the finish. It is best to use steel trowels to avoid gray marks on the coating.

You can find pebbles in shops that sell minerals, or look for them in riverbeds or by the sea. You need a hard, fine-grained stone like granite, basalt, or agate. We have had stones specially made that provide excellent results.

Tadelakt Preparation

We recommend applying Galtane Tadelakt over a hydraulic lime plaster, but it can also be used on ordinary lime and cement plasters. The surface must be rough for better adhesion. Old, unstable substrates must be removed.

Instead of gypsum boards (drywall or Fermacell), we recommend wood fiber boards bonded with magnesia cement (Heraklith).

You can also apply Tadelakt to other less suitable substrates—drywall, gypsum-cellulose, gypsum plaster, terracotta—provided you first cover them with a coat of tile adhesive using a notched trowel. Dampen the substrate well before applying Galtane Tadelakt.

Application

  1. Gradually pour the Tadelakt powder into 250 ml of water per kg of powder.
  2. Use a mixer attachment on a drill.
  3. Let it rest for 30 minutes, then stir again. Prepared Galtane Tadelakt must be used within 10 hours.

Use lime-resistant natural pigments to color Galtane Tadelakt (avoid Cassel brown), in a ratio of 5% for oxides and 10% for earths. Let the pigments swell in a little water (pasty consistency) before incorporating them into the mixing water. You can also add pigment paste to the already prepared mixture; in this case, mix everything thoroughly.

Apply a first thin layer of Tadelakt and let it set before applying a second layer. Smooth with the trowel, then polish with the stone and finally the spatula.

Finishing:

Apply Polishing Soap (ref. 2035) with a brush until saturated. Let it set a little before polishing with the stone. This creates a deeper shine and better resistance to water and dirt: the chemical reaction of the soap with the lime in the substrate provides this water-repellent quality. To increase water resistance, apply another coat of polishing soap after 2 to 3 days.

Drying:

Recoatable after 12 to 20 hours at 68°F. Tadelakt only reaches its maximum hardness after about 4 weeks.

Coverage:

Approximately 2.5 kg per m².

Tool cleaning: With water.

Maintenance:

For maintenance, use a sponge dipped in lukewarm soapy water (Marseille soap). Do not use abrasives or acidic detergents. Keep your Galtane Tadelakt mixture in a container with water on top for touch-ups.

Storage:

The powder keeps for at least 6 months in a dry place. The preparation must be used within 10 hours. Tadelakt residues can be disposed of in a landfill once dry.

Precautions:

Protect eyes and skin. In case of eye contact, rinse thoroughly with water and consult a doctor if necessary. Protect glass, metal, and painted surfaces during application. Clean splashes with water.

Where to buy Tadelakt in Belgium and France?

Whether you live in Belgium, France, Switzerland, or Luxembourg, there is always a Galtane dealer near you. Check our interactive map. You can also buy all our products online.

Your Shopping cart

Close