Wood Bliss ® High-C – 4055 – Wood fire retardant – CLT

Wood Bliss ® High-C – 4055 – Wood fire retardant – CLT

REF : 4055 CLT
Price range: 33,30 € through 241,10 €
Free of halogenated flame retardants, borates, formaldehyde, PFAS, and more… The fire protection treatment for wood and CLT is based on natural mineral materials: Wood Bliss® High-C is a new-generation “B-S1-d0” mineral flame retardant. Non-toxic fire-retardant treatment for wood and CLT panels, with fire performance rated “B-S1-d0” according to EN 13501:1. Fire-retardant properties: Test results in accordance with the European reference standard have confirmed Wood Bliss High-C’s ability to provide fire protection for structural wood, including CLT panels. It meets the requirements for residential construction, office buildings, schools, and more. Wood Bliss® High-C does not contaminate the wood. When a wooden building is demolished, the wood can be reused. During a project, wood treated with Wood Bliss® High-C should not be considered polluting or hazardous waste.

In stock

Pack size
Choose an option▾
  • 500 ml
  • 1 L
  • 5 L
clear

Benefits for the home and its materials

  • Mineral formulation: Free of PFAS, free of halogenated flame retardants, borates, formaldehyde, and solvents.

  • Evaluation independent: The composition and safety of the product are subject to chemical and microbiological at various laboratories and engineering firms run by independent engineers (Zörner, Lafu).

  • Indoor air quality: Its mineral composition based on silicates does not release dangerous synthetic VOCs into the home.

Additional details

Good to know

To remain compliant with the 13501-1 standard, no other finishing product can be applied after Wood Bliss® High-C. The treatment consists of applying: 1 x 200ml/m² of Wood Bliss® ref. 4050 and 2 x 200ml/m² of Wood Bliss® High-C ref. 4055 Mineralization and hardening are achieved after 6 weeks. Whitish traces may appear after treatment. After 6 weeks, you can remove them with a dry cotton cloth. At the same time, this process will protect the wood from wood-boring insects and wood-decay fungi. Since Wood Bliss® contains no questionable substances, wood scraps from a project will not be considered materials to be disposed of with hazardous waste. The same applies when the building is deconstructed.

Properties

  • Given that the silicate molecules have been once they are impregnated and mineralized in the wood, do not evaporate or dissolve in water, the effectiveness of Wood Bliss High-C is unlimited over time.
  • The advantage of the Wood Bliss and Wood Bliss High-C is that you will have a protection against the fire, the fungi that feed on wood and wood-boring insects… 3 benefits in 1 product for the panels made of wood, CLT, frames…

Finish Type

  • With the Wood Bliss and Wood Bliss High-C which are not subject to not any toxic treatments for wood and for framework, you will continue to enjoy a “wooden” feel ” after treatment. The wood will not have the appearance of a synthetic surface.
  • With Wood Bliss, the concept of “Biophilia” will be preserved.

Technical specifications

Coverage

200ml/m²

Coats

2

Drying time

24h

Pack size

500 ml, 1 L, 5 L

Any questions?

Learn More

Fire protection for wood and CLT (Cross Laminated Timber) panels

Wood Bliss® High-C: new generation “B-S1-d0” mineral fire retardant.

Fire retardant treatment for CLT panels and reaction to fire according to EN 13501-1 standard

Fire-retardant property: the results of tests conducted in accordance with the standard of European European have confirmed the ability of Wood Bliss® High-C to make fire-resistant the wood used in construction including the panels made of CLT.

It meets fire safety requirements and standards for residential construction, office buildings, schools, and more.

Tests conducted in September 2019 by the University of Stuttgart in accordance with standard EN 13501-1:2018 on Douglas fir and CLT panels impregnated with one coat of Wood Bliss® (ref. 4050) and two coats of Wood Bliss® High-C (ref. 4055) yielded the following excellent results: B-S1-d0. Fire reaction class: B—very difficult to ignite (M1 according to the French standard) Smoke production: S1—low smoke emission Formation of flaming droplets: d0—none

Wood Preservation in the renovation of older buildings: Pests gnaw on the wood, causing thereby a loss of mass and of stability. Wood Bliss® fills the channels with nutrients, strengthens the wood cracked wood and replaces thereby the mass of wood lost.

Applying this product helps avoid expensive renovation techniques and the disposal of infested wood.

How does Wood Bliss® High-C work for B-S1-d0 reaction to fire?

Wood Bliss® High-C also acts as a mineral flame retardant thanks to a combination of factors a mineral flame retardant thanks to a combination of factors a mineral flame retardant thanks to a combination a mineral flame retardant thanks to a combination a mineral flame retardant thanks to a9> thanks to a combination of a non-combustible PFAS-free barrier, heat absorption through evaporation and a minimum amount of flammable gases. Wood Bliss® High-C extends the ignition time and reduces the speed at which the fire spreads.

Wood Bliss® High-C does not pollute the wood.

When a wooden building is deconstructed, the wood can be reused. During a project, wood treated with Wood Bliss High-C should not be classified as polluting or hazardous waste.

Your Shopping cart

Close